Can't see model in pose mode

Constrepar · January 2020

When entering pose mode, the model (bunny, or the other templates) goes completely invisible; only the nodes can be seen.
Also, I can manipulate said nodes, but cannot retain their position when I exit pose mode.
Is this normal?
Thanks in advance.

odes · January 2020

http://forum.yiffalicious.com/discussion/1984/yl2-how-to-report-issues#latest

Constrepar · January 2020

https://pastebin.com/B8Rrz8m2

Sorry for the delay.

Constrepar · January 2020

Here's what the issue looks like:
https://imgur.com/a/oJcIaMt

odes · January 2020

This is a very strange problem. I can't find anything out of the ordinary in the logs. You are using a rather potato graphics chip though, so that might have something to do with it.

All I can recommend is updating your gfx drivers:
https://downloadcenter.intel.com/product/96551/Intel-HD-Graphics-620

Let me know if it helps!

odes · January 2020

Oh, the pose in edit mode will always be a T-pose, but if you go back to pose mode, the pose you configured should remain from before.

Constrepar · January 2020

Looks like my hardware is the issue. Guess YL2 is something I'll have to look forward to when I get a more capable setup.
Thanks for all your help.

odes · January 2020

Did you try updating the driver? The one you were using when reporting this problem is more than 1 year old, so that may very well be the problem.

Constrepar · January 2020

I did. I got an error message saying the driver being installed has not been validated for my computer.

odes · February 2020

Out of curiosity, if you zoom far away like 15 meters, will the character start appearing?

Howdy, Stranger!

Categories

Can't see model in pose mode

Comments